Watlow EZ-ZONE PM EXPRESS Panel Mount Controller

EZ-Zone PM Express
Zesta Watlow EZ-ZONE PM EXPRESS Panel Mount Controller
Zesta Watlow EZ-ZONE PM EXPRESS Panel Mount Controller
Zesta Watlow EZ-ZONE PM EXPRESS Panel Mount Controller
Zesta Watlow EZ-ZONE PM EXPRESS Panel Mount Controller
The Watlow® EZ-ZONE® PM Express panel mount controller is an industry leading PID controller that allows optimal
performance utilizing simple control and menu functionality without complex features. It is ideally suited for basic applications and usage levels.

The EZ-ZONE PM Express is the next generation controller to follow the legacy of Watlow’s SERIES 93, SERIES 935 and SERIES SD controllers that offer easy-to-use features to perform many basic applications.
The EZ-ZONE PM Express includes one universal input and an option for up to two outputs and is available in 1/32, 1/16, 1/8 and 1/4 DIN panel mount packages. It can be ordered as a PID process controller or as a dedicated over and under-temperature limit controller.

The EZ-ZONE PM Express is a valuable addition to the EZ-ZONE PM controller family which also includes the EZ-ZONE PM integrated controller and the EZ-ZONE PM standard version.
Back to Integrated Multi Function Controllers

Product Features

Simplified menu
  • Fits basic applications with a user-friendly interface
  • supported by two menus and a streamlined list of parameters
  • Eliminates user complexity often experienced with more advanced controllers and unnecessary features
  •  Reduces user training costs and user programming errors
PID auto-tune
  • Provides auto-tune for fast, efficient start-up
Standard bus communications
  • Allows easy product configuration via PC communications protocol and free software
  • Saves time, simplifies programming process and improves reliability of controller setup
Factory Mutual (FM) approved over and under limit with
auxiliary outputs
  • Increases user and equipment safety for over and under-temperature conditions
Agency approvals: UL® listed, CSA, CE, RoHS, W.E.E.E.,
FM, SEMI F47-0200, Class 1, Div. 2 rating on selected
models
  • Assures prompt product acceptance
  • Reduces end product documentation costs
Front panel removable
  • Saves time and labor with replacements and troubleshooting
P3T armor sealing system
  • Complies to NEMA 4X, IP65 specifications
  • Allows controller to be cleaned and washed
  • Certified UL® 50 independent to NEMA 4X specification
Touch-safe package
  • Increases installer and operator safety
  • Complies with IP2X requirements
Consistent Termination Labeling (CTL) connection
system
  • Simplifies switching between products
  • Speeds up user’s system documentation
Three-year warranty
  • Demonstrates Watlow’s reliability and product support
High-amperage power control output
  • Drives 15 ampere resistive loads direct
  • Reduces component count
  • Saves panel space and simplifies wiring
  • Reduces cost of ownership

Product Specifications

Controller:
  • User selectable heat/cool, on-off, P, PI, PD, PID or alarm action, not valid for limit controllers
  • Auto-tune with control algorithm
  • Control sampling rates: input = 10Hz, outputs = 10Hz
  • Input and output capacity per controller type ordering information
Serial Communications:
  • Isolated communications
  • Standard bus configuration protocol
Wiring Termination—Touch-Safe Terminals:
Input, power and controller output terminals are touch safe removable 12 to 22 AWG
Universal Input:
  • Thermocouple, grounded or ungrounded sensors, greater than 20MΩ input impedance, 2kΩ source resistance max.
  • Non-isolated to switched dc and process output
  • RTD 2- or 3-wire, platinum, 100Ω @ 0°C calibration to DIN curve (0.00385 Ω/Ω/°C)
  • Process, 4-20mA @ 100Ω, or 0-10VDC @ 20kΩ input impedance; scalable
Functional Operating Range:
  • Type J: -346 to 2192°F (-210 to 1200°C)
  • Type K: -454 to 2500°F (-270 to 1371°C)
  • Type T: -454 to 750°F (-270 to 400°C)
  • Type E: -454 to 1832°F (-270 to 1000°C)
  • Type N: -454 to 2372°F (-270 to 1300°C)
  • Type C: 32 to 4200°F (0 to 2315°C)
  • Type D: 32 to 4200°F (0 to 2315°C)
  • Type F: 32 to 2449°F (0 to 1343°C)
  • Type R: -58 to 3214°F (-50 to 1767°C)
  • Type S: -58 to 3214°F (-50 to 1767°C)
  • Type B: 32 to 3300°F (0 to 1816°C)
  • RTD (DIN): -328 to 1472°F (-200 to 800°C)
  • Process: -1999 to 9999 units
Accuracy:
  • Calibration accuracy and sensor conformity: ±0.1% of span, ±1°C @ the calibrated ambient temperature and rated line voltage
  • Type S: 0.2%
  • Type T below -50°C: 0.2%
  • Calibration ambient temperature @ 77°F ±5°F (25°C ±3°C)
  • Accuracy span: 1000°F (540°C) min.
  • Temperature stability: ±0.1°F/°F (±0.1°C/°C) rise in ambient max.
Output Hardware:
  • Switched dc = 22 to 32VDC @ 30mA
  • Open collector = 30VDC max. @ 100mA max. current sink
  • Solid state relay (SSR), Form A, 0.5A @ 24VAC min., 264VAC max., opto-isolated, without contact suppression
  • Electromechanical relay, Form C, 24 to 240VAC or 30VDC max., 5A resistive load, 100,000 cycles at rated load
  • Electromechanical relay, Form A, 24 to 240VAC or 30VDC max., 5A resistive load, 100,000 cycles at rated load
  • Output 2 is limit for limit models
  • NO-ARC relay, Form A, 24 to 240VAC, 15A @ 122°F (50°C), resistive load, no VDC, 2 million cycles at rated load
  • Universal process output: range selectable; 0 to 10VDC ±15mV into a min. 1,000Ω load with 2.5mV nominal resolution; 4 to 20mA ±30μA into max.
  • 800Ω load with 5μA nominal resolution; temperature stability 100ppm/°C
Line Voltage/Power:
  • 85 to 264VAC, 47 to 63Hz
  • 20 to 28VAC, +10/-15%; 50/60Hz, ±5%
  • 12 to 40VDC
  • 10VA (1/32 and 1/16 DIN), 14VA (1/8 and 1/4 DIN) max. power consumption
  • Data retention upon power failure via non-volatile memory
  • Compliant with SEMI F47-0200, Figure R1-1 voltage sag requirements @ 24VAC or higher
Environment:
  • 0 to 149°F (-18 to 65°C) operating temperature
  • -40 to 185°F (-40 to 85°C) storage temperature
  • 0 to 90% RH, non-condensing
Agency Approvals:
  • cULus® UL/EN/CSA C22.2 No 61010-1 Listed, File E185611
  • CSA C22.2 No. 24, File 158031
  • UL® 50 4X indoor locations, NEMA 4X, IP65 front seal
  • cULus® ANSI/ISA 12.12.01-2007, CSA-C22.2 No. 213-1987, Class 1, Div. 2, Groups A, B, C and D, temperature code T4A, File E184390 (optional)
  • CE, RoHS by design, W.E.E.E.
  • FM Class 3545 (limit controls)