 |
Adjustable SpringAdjustable spring style thermocouple fits a large range of hole depths. Bends to any angle, eliminating the requirement to stock numerous styles. |
|
|
|
||
 |
Adjustable ArmorAdjustable armor thermocouple fits a large range of hole depths. Bends to any angle, eliminating the requirement to stock numerous styles. Stainless steel hose offers additional lead protection in demanding applications. |
|
|
|
||
 |
Rigid SheathRigid sheath provides protection and accurate placement through bulkheads or platens. Use with a compression fitting for water tight immersion application. Bent rigid tube offers protection and accurate lead placement around machinery. |
|
|
|
||
 |
Rigid Sheath with Threaded FittingRigid sheath with threaded fitting provides accurate placement in process applications. |
|
|
|
||
 |
PFA Encapsulated StyleThe rigid sheath is covered with a 0.010 inch (25 mm) wall of PFA for corrosion resistance in acid environments. An epoxy seal improves moisture resistance of sensor and provides a barrier for migrating fumes in corrosive applications. |
|
|
|
||
 |
Flange StyleThe flanged thermocouple allows rapid assembly and low profile when going through bulkheads. |
|
|
|
||
 |
Rigid Sheath Fixed Bayonet StyleBayonet fittings allow rapid attachment. Spring pressure on the junction tip assures fast response time. This style of bayonet fitting is quick connecting and allows leads to exit with a protective sheath. |
|
|
|
||
 |
Flexible ExtensionsFlexible extensions allow the disconnecting of thermocouples from a system without disturbing the remaining wiring. |
|
|
|
||
 |
Exposed Junction StyleThe exposed junction is suitable for most general purpose applications, such as measuring air, gas and surface temperatures. |
|
|
|
||
 |
Ring Terminal StyleThe nickel terminal can be placed beneath existing screws or bolts to permit surface temperature measurement. |
|
|
|
||
 |
Nozzle StyleThe nozzle thermocouple has a short installation depth and a low profile thus allowing control of thin sections of platens. |
|
|
|
||
 |
Pipe Clamp StyleThe stainless steel clamp allows temperature measurement without drilling or tapping. Ideal for measuring pipe temperatures. |
|
|
|
||
 |
Grommet StyleExtremely low profile of the stainless steel grommet provides fast response time. |
|
|
|
||
 |
Brass Shim StyleThe shim stock thermocouple has low profile and can be placed between components for measurement of surface temperature. Available in other shim dimensions. |
|
|
|
||
 |
Stainless Steel Shim StyleThe shim stock thermocouple has low profile and can be placed between components for measurement of surface temperature. Available in other shim dimensions. |
|
|
|
||
 |
Kapton® Bracket StyleThe Kapton® thermocouple, when used with the aluminum bracket, has been designed primarily to measure roller temperature. By putting a light pressure on the roller, the Kapton® thermocouple measures roller surface temperature without using slip rings. It can also be used to measure conveyor belt temperatures or any other moving part by riding gently on the part surface. |
|
|
|
||
 |
Low Profie Kapton® Peel & Stick StyleThis sensor needs no bracket and no special mounting. Simply peel away the backing and this self-adhesive film will bond to almost any surface. Temperature ratings for continuous use is 200°C (400°F). |
|
|
|
||
 |
Melt Bolt ThermocoupleMelt bolt thermocouples are designed so that the sensitive closed end portion of the tip can be inserted directly into the plastic stream of an extruder or injection molding machine. The measuring junction is thermally isolated from the metal bolt mass, assuring accurate reading of the melt temperature up to 260°C (500°F) continuous. Bolt is 300 series stainless steel. |
|