sensor_thermocouple_10_300w

Adjustable Spring

Adjustable spring style thermocouple fits a large range of hole depths. Bends to any angle, eliminating the requirement to stock numerous styles.

Datasheet

sensor_thermocouple_12_300w

Adjustable Armor

Adjustable armor thermocouple fits a large range of hole depths. Bends to any angle, eliminating the requirement to stock numerous styles. Stainless steel hose offers additional lead protection in demanding applications.

Datasheet

sensor_thermocouple_20_300w

Rigid Sheath

Rigid sheath provides protection and accurate placement through bulkheads or platens. Use with a compression fitting for water tight immersion application. Bent rigid tube offers protection and accurate lead placement around machinery.

Datasheet

sensor_thermocouple_23_300w

Rigid Sheath with Threaded Fitting

Rigid sheath with threaded fitting provides accurate placement in process applications.

Datasheet

sensor_thermocouple_65_300w

PFA Encapsulated Style

The rigid sheath is covered with a 0.010 inch (25 mm) wall of PFA for corrosion resistance in acid environments. An epoxy seal improves moisture resistance of sensor and provides a barrier for migrating fumes in corrosive applications.

Datasheet

sensor_thermocouple_25_300w

Flange Style

The flanged thermocouple allows rapid assembly and low profile when going through bulkheads.

Datasheet

sensor_thermocouple_30_300w

Rigid Sheath Fixed Bayonet Style

Bayonet fittings allow rapid attachment. Spring pressure on the junction tip assures fast response time. This style of bayonet fitting is quick connecting and allows leads to exit with a protective sheath.

Datasheet

sensor_thermocouple_60_300w

Flexible Extensions

Flexible extensions allow the disconnecting of thermocouples from a system without disturbing the remaining wiring.

Datasheet

sensor_thermocouple_61_300w

Exposed Junction Style

The exposed junction is suitable for most general purpose applications, such as measuring air, gas and surface temperatures.

Datasheet

sensor_thermocouple_70_300w

Ring Terminal Style

The nickel terminal can be placed beneath existing screws or bolts to permit surface temperature measurement.

Datasheet

sensor_thermocouple_71_300w

Nozzle Style

The nozzle thermocouple has a short installation depth and a low profile thus allowing control of thin sections of platens.

Datasheet

sensor_thermocouple_72_300w

Pipe Clamp Style

The stainless steel clamp allows temperature measurement without drilling or tapping. Ideal for measuring pipe temperatures.

Datasheet

sensor_thermocouple_73_300w

Grommet Style

Extremely low profile of the stainless steel grommet provides fast response time.

Datasheet

sensor_thermocouple_74_300w

Brass Shim Style

The shim stock thermocouple has low profile and can be placed between components for measurement of surface temperature. Available in other shim dimensions.

Datasheet

sensor_thermocouple_75_300w

Stainless Steel Shim Style

The shim stock thermocouple has low profile and can be placed between components for measurement of surface temperature. Available in other shim dimensions.

Datasheet

sensor_thermocouple_kapton_bracket300w

Kapton® Bracket Style

The Kapton® thermocouple, when used with the aluminum bracket, has been designed primarily to measure roller temperature. By putting a light pressure on the roller, the Kapton® thermocouple measures roller surface temperature without using slip rings. It can also be used to measure conveyor belt temperatures or any other moving part by riding gently on the part surface.

Datasheet

sensor_thermocouple_kapton_peelstick300w

Low Profie Kapton® Peel & Stick Style

This sensor needs no bracket and no special mounting. Simply peel away the backing and this self-adhesive film will bond to almost any surface. Temperature ratings for continuous use is 200°C (400°F).

Datasheet

sensor_thermocouple_melt_bolt300w

Melt Bolt Thermocouple

Melt bolt thermocouples are designed so that the sensitive closed end portion of the tip can be inserted directly into the plastic stream of an extruder or injection molding machine. The measuring junction is thermally isolated from the metal bolt mass, assuring accurate reading of the melt temperature up to 260°C (500°F) continuous. Bolt is 300 series stainless steel.

Datasheet