heater_heattrace_srl100x100

SRL – Self Regulating Low Temperature

SRL self-regulating heating cable provides safe, reliable heat tracing for freeze protection of pipes, valves, tanks and similar applications. Constructed of industrial grade 16 AWG buss wire with a tinned copper braid and optional overjacketing, SRL ensures operating integrity in Div. 2 hazardous environments as well as certain corrosive industrial environments. SRL heating cable has a maximum maintenance temperature rating of 150F (65C).

  • Self-Regulating, Energy Efficient
  • 16 AWG Buss WireCircuit Lengths to 660 Feet
  • Process Temperature Maintenance to 150F (65C)
  • Maximum Continuous Exposure Temperature, Power Off, 185F (85C)
  • Industrial Freeze Protection Applications
  • Field Splicing Without Disrupting Heat Output
  • 3, 5, 8 and 10 W/Ft.120 and 208 – 277 Volt From Stock
  • Approximate Size 3/8”W x 1/8″H
  • Min. Bend Radius 1-1/8″For Use on Metal and Plastic Pipes
Datasheet

heater_heattrace_srm100x100

SRM/E – Self Regulating Medium Temperature

SRM/E self-regulating heating cable provides safe, reliable heat tracing for process temperature maintenance and freeze protection of pipes, valves, tanks and similar applications. Constructed of industrial grade 14 AWG buss wire with metal braid and optional overjacketing, SRM/E ensures operating integrity in most hostile industrial environments. The 420F (215C) maximum exposure temperature rating allows steam cleaning of process equipment with up to 300 psig steam.

  • Self-Regulating, Energy Efficient
  • 14 AWG Buss Wire
  • Circuit Lengths to 780 Feet
  • Process Temperature Maintenance to 302°F (150°C)
  • Maximum Continuous Exposure Temperature, Power Off, 420°F (215°C)
  • Industrial Process Maintenance Applications
  • Industrial Freeze Protection Applications
  • Freeze Protection of Fire Protection System Piping
  • Steam Cleanable on Process Equipment Up to 300 PSIG
  • 3, 5, 8, 10, 15 and 20 W/Ft.120 and 208 – 277 Volt From Stock
  • Approximate Size 1/2″W x 1/4″H
  • Minimum Bend Radius 1-1/2″For Use on Metallic Pipes Only
Datasheet

heater_heattrace_cwm100x100

CWM – Constant Wattage Medium Temperature

CWM constant wattage heating cable is a proven, reliable solution for industrial process temperature maintenance and freeze protection. CWM features a parallel heating core that produces uniform thermal output over its entire length. Using a single power point, you can easily configure and install a heat tracing system as short as several feet or as long as 780 feet right in the field. System design only requires that you match the CWM cable thermal output to the heat loss of your piping system. CWM is flexible at most ambient temperatures and can be wrapped around piping and complex fittings. It is rugged, easy to monitor and maintain temperature, and has zero inrush at start-up. With 392°F (200°C) fluoropolymer electrical insulation overjacketing, CWM has outstanding electrical and thermal properties, and is well suited for most chemically hostile environments. An extensive range of wattages and voltages are available immediately from Chromalox stock.

  • Uniform Thermal Output
  • Accurate, Easy to Control and Monitor
  • Low Energy Cost
  • No Inrush at Any Ambient
  • Industrial/Process and Commercial/Construction Applications
  • Flexible to Most Any Configuration
  • Fluoropolymer Jacket
  • Maximum Exposure Temperature, Power Off, 392°F (200°C)
  • Steam Cleanable on Process Equipment Up to 190 PSIG (Power Off)
  • 4, 8 and 12 W/Ft.
  • 120, 208 – 277 and 480 Volt From Stock
  • Approximate Size 1/4″W x 1/8″H
  • Minimum Bend Radius 1-1/4″
  • For Use on Metallic Pipes Only
  • Consult Factory for Use on Plastic Pipes
Datasheet

heater_heattrace_mi100x100

Mineral Insulated High Temperature

MI mineral insulated heating cables provide rugged and reliable heat tracing for a variety of demanding applications. The high nickel alloy sheath, magnesium oxide dielectric insulation and resistance wire construction allow the tracing of equipment up to 900°F maintenance temperatures and excellent resistance to many corrosive environments. At lower temperatures, watt densities of up to 50 W/Ft can be designed. Please contact factory for cable maintenance temperature above 400°F.

  • Constant Wattage Series Resistance Heating Cable Sets
  • Process Temperature Maintenance to 900°F
  • Maximum Exposure Temperature (Power Off) 1100°F
  • Wattages up to 50 W/Ft.
  • Corrosion Resistant, Alloy 825 Sheath
  • Factory Assembled Cable Sets—Ready for Installation
  • Fully Annealed Sheath allows Field Bending
  • Suitable for Hazardous Areas, Div. 1 and Div. 2 (Consult Factory for Div. 1 Applications)
  • For Use on Metallic Pipes Only
Datasheet